Home > News > Content
Pure Sine Wave Inverter Is The Best Use Environment
- Jul 24, 2018 -

Pure Sine Wave Inverter cannot be installed in an environment that can be exposed when it is installed, especially when rain will cause dampness, and Pure Sine Wave Inverter is not allowed to have any water on the power supply. Pure Sine Wave Inverter should be kept in a temperature range of 1 to 40 degrees Celsius, no higher or lower than him. Pure Sine Wave Inverter also cannot be installed in the middle of an easily combustible object, or in a place where dust is easily accessible.

If the cable is very long, it should not be used, but you need to separate Pure Sine Wave Inverter from the battery. The battery is also not allowed to be exposed to the outside. The gas produced is highly corrosive, and if it is long, it will damage the Pure Sine Wave Inverter inside. Pure Sine Wave Inverter is directly connected to its own load, and the power supply in it is able to control its own technical application. A basic circuit is very simple, but its output of ningbo is also very large, because the current in it is very large.

Pure Sine Wave Inverter later transferred out of his own multiple power supply for a design of very small content, which is also able to put the elegant waveform inside, and then obtained a very wide range of applications.


Copyright © Wenzhou Roger Electronic Technology Co.,Ltd All Rights Reserved.